Omron Electronics W7ED Series Touch Sensors
Omron Electronics W7ED Series Touch Sensors offers engineers minimal development time since there is no need to perform sensitivity adjustments or design circuits. The touch electrodes and touch sensors can be fastened using screws facilitating touch sensor configurations without using a PCB. This product offers a longer lifecycle than mechanical switches and is much easier to design with than Touch Sensor IC's.
Features
Suitable for embedding in equipmentEnables touch sensor configurations to be created that suit your application. Touch electrodes and touch sensor electrodes can be fastened just using screwsBody-to-electrode static electricity transfers can be easily be prevented using FG terminal modelsSupports 5 to 15VDC, with open-collector output
Specifications
Detected capacitance: 25 ± 5pFPower supply voltage: 5 VDC (-10%) to 15 VDC (+10%)Output: Open collector (max. output current: 10mA)Residual output voltage: 0.4V max.Operation mode: When detecting capacitance (human touch detected): Output transistor ON When not detecting capacitance (no humantouch detected): Output transistor OFFCurrent consumption: 10mA max.Voltage influence: With rated supply voltage within a range of ±10% and a rate of change for detected capacitance within ±10% whenpowered using the rated supply voltageTemperature influence: Within an ambient temperature range when operating and a rate of change for detected capacitance within ±10% at +23°CAmbient temperature: When in use: -10 to 60°C (no icing or condensation) When in storage: -20 to 70°C (no icing or condensation)Ambient humidity: 25 to 85%RH
Applications
EnergyGround and air source heat pumpsSmart metersSub meteringDC managementBuilding automation & securityLighting and domoticsVentilation and temperature controlSafety and securityLifts and elevatorsHome appliancesWhite goods for fabric care and dishwashingWhite goods for food preparation and preservationGas and electric boilersDomestic appliances
Omron electronics Newest
Omron A22NE-PD Emergency Stop Pushbutton Switches feature a Lock Detection contact that minimizes E-stop failures during emergency shutdowns.
Date: 2019-08-26Omron Electronics B5W-LB Light Convergent Reflective Sensors offer a 24VDC voltage rating, 20mA maximum current consumption, and a 10 to 55Hz vibration resistance range.
Date: 2019-08-07Omron Electronics W7ED Series Touch Sensors are available at Mouser Electronics and offer a longer lifecycle than mechanical switches and easier to design with than Touch Sensor IC's.
Date: 2019-08-02Omron Electronics G3VM-26M MOS FET Relay offers a 5VDC rated input voltage, a 15mA input current, and a 500MΩ insulation resistance.
Date: 2019-07-25Omron Automation G6D/G3DZ Push-In Terminal Relay offers a 12 or 24VDC operation coil rating, a 5A carry current, and a 100mΩ maximum contact resistance.
Date: 2019-06-27Omron Automation S8VK-WA 3-Phase 200V Power Supply offers a 24VDC output using 170 to 264VAC input, and a 240 to 960W power rating..
Date: 2019-06-24Omron Electronics G2RL-E2 Power PCB Relays are single-pole relays for high current load switching and high ambient temperature.
Date: 2019-05-08Omron Industrial Automation E3NX-MA Smart Fiber Amplifier Units reduce installation space by half and decrease the size of the control panel.
Date: 2019-04-05